How to Do a Proper Maintenance of Your Motorcycle

No motorcycle company doesn’t recommend proper maintenance for its bikes. And there’s a reason for this: regular motorcycle care and maintenance can help keep your bike running smoothly and extend its lifespan.

Aside from making your bike look nicer, keeping it properly maintained will also ensure that it’s safe to ride. Here are some tips on how to do proper motorcycle maintenance:

1. Keep the engine clean

One of the most important aspects of motorcycle maintenance is keeping the engine clean. This can be done by using a brush or a vacuum cleaner. Ensure to remove any dirt or debris collected in and around the engine.

A clean engine is a happy engine. Not only will it run more smoothly, but it will also be easier to spot any potential problems early on. A simple way to clean your engine is to use a de greaser and a brush. Be sure to wear gloves and goggles when doing this, as the de greaser can be harmful if it comes into contact with your skin or eyes.

2. Check the oil level

The oil level in your bike’s engine directly affects its performance and lifespan. It is important to check the oil level of your motorcycle regularly. It would help if you did it before every long ride and definitely before any racing or stunt riding.

First, make sure the bike is parked on a level surface to check the oil level. Then, locate the dipstick – it will be either sticking out of the engine or attached to the frame near the engine. Remove the dipstick and wipe it with a cloth or paper towel. Reinsert the dipstick back in, then remove it again. Check where the oil level sits about the Full or Max marks on the dipstick. If below either of those marks, add oil to the engine.
Be sure not to overfill the engine with oil, as that can also be harmful. Refer to your bike’s owner’s manual for the recommended oil level.

3. Check the tire pressure

One of the most important aspects of motorcycle maintenance is checking the tire pressure. Riding on under-inflated tires can lead to a blowout and serious accidents.

To check your tire pressure, use a good quality gauge and measure the pressure in psi (pounds per square inch). The recommended air pressure for your bike’s tires will usually be printed on the sidewall of the tire itself. If the pressure is below the recommended level, use a pump to increase it.

4. Inspect the chain and sprockets

The chain and sprockets on your motorcycle transmit power from the engine to the wheels. They are also subject to a great deal of wear and tear, so it’s important to inspect them regularly.

To inspect the chain and sprockets, remove the side cover or cowling that protects them. Then, use a brush or a rag to clean off any built-up dirt or grease. Check the condition of the links in the chain and look for any signs of wear or damage. If needed, replace the chain and sprockets. Consult your bike’s owner’s manual for the correct replacement parts.

5. Lubricate the chain

One of the best ways to extend the life of your motorcycle’s chain is to lubricate it regularly. You can buy special lubricants at any automotive store, or you can use a household product like WD-40.

To lubricate the chain, remove the side cover or cowling that protects it. Then, apply a thin coat of lubricant to the links in the chain. Let it soak in for a few minutes, then wipe off any excess with a rag or paper towel. Reinstall the side cover.

6. Check the brakes

Your motorcycle’s brakes are one of its most important safety features. It’s important to check them regularly to ensure they are functioning properly.

First, make sure the bike is parked on a level surface to check the brakes. Then, apply pressure to the brake lever and hold it. Have a friend press down on the rear wheel of the bike. The brake pads should touch the wheel and create resistance. You will need to take your motorcycle in for service if they don’t.

7. Clean the bike

One of the simplest ways to maintain your motorcycle is to keep it clean. A good cleaning job will eliminate all the dirt, dust, and grime that can build up over time and cause damage.

To clean your motorcycle, start by hosing it down with water. Then, use a brush or a rag to scrub away any dirt or grease. Be sure to pay special attention to the engine and other dirty areas. Finally, rinse the bike off with more water and allow it to air dry.

8. Store your bike properly

It’s important to store your motorcycle in a safe place when you’re not using it. This will help protect it from theft, damage, and the elements.

Ideally, it would help store your bike in a covered area, like a garage or shed. If you don’t have access to a covered space, be sure to park it in a well-lit area where it will be visible to passersby. And always make sure to remove the key and lock it up when you’re not using it.

Motorcycle maintenance can seem daunting, but it’s not too difficult if you break it down into simple steps. By following these tips, you can keep your bike in good condition and ensure that it runs safely and smoothly.